The Quad 2-Input NAND Schmitt Trigger Datasheet for Wave and Pulse Shapers Applications

Sponsored Links


If you need a quad two-input NAND gate which each input has a Schmitt trigger circuit you may consider theSchmitt trigger applications for the HEF4093B driven via a high-impedance input circuit schematic HEF4093B. It is suitable for industrial temperatur range (-40 °C to +85 °C) and/or automotive temperature range (-40 °C to +125 °C), and for applications such wave and pulse shapers, astable multivibrators, and monostable multivibrators.

It is recommended to operate this HEF4093B at Vdd power supply range of 3V to 15V referenced to Vss(ground). You must connect Vdd, Vss or another inputs with unused inputs, according to the datasheet. Another features of this device are fully static operation, Schmitt trigger input discrimination, complies with JEDEC standard JESD 13-B, and have an ESD protection exceeds 200V/2000V.

The figure above is example of Schmitt trigger applications for the HEF4093B driven via a high-impedance input. If so, it is necessary to use a capacitor C with a value of capacitor equation ; then you can have an oscillation on the edges of a pulse.

Follow on complete read of The Quad 2-input NAND Schmitt Trigger for Wave and Pulse Shapers Applications in the HEF4093B datasheet here (source: nxp.com)

Tags: , , ,

| More



This entry was posted on Friday, July 10th, 2009 at 1:29 pm and is filed under Power IC. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Related:

  • ON Semi SN74LS00, 4 Independent 2-Input Positive-NAND Gates Datasheet
    SN74LS00 is a low power Schottky contain four independent (quadruple) 2-input NAND gates. The herein picture shows the pinout diagram of this SN74LS0...
  • CD4093BC Connection Diagram and Datasheet
    CD4093BC Quad 2-Input NAND Schmitt Trigger Connection Diagram appears in the following circuit schematic. The device consists of four Schmitt-trigger ...
  • The Astable-Oscillator Operating Mode in 555 Timer IC Circuit
    The 555 Timer IC worked in three operating modes: monostable, astable and bistable/scmitt trigger. Here we will provide you with article of its astab...
  • What You Should Know About CMOS Schmitt Trigger
    A Schmitt trigger is a comparator circuit that incorporates positive feedback. Schmitt triggers commonly used in many circuits for noise immunity and...
  • Construct Square Wave Oscillator using CMOS Logic Element
    The following information within contain application note which describe you with several square wave oscillators that can be built using CMOS logic ...

    • « Produce Oscillator Applications Using the version of the 555 IC

    What You Should Know About CMOS Schmitt Trigger »

    Search terms:

    gated, trigger smith gates, data sheet of 4093 quad 2 input schmitt nand gate ic, rs485 schmitt trigger auto switch, schmitt trigger applications, how to generate square wave using schmitt trigger data sheet, quad smidth trigger, smith trigger nand gate, smit trigger nan gate, ic 4093 two input quad schmitt nand



    Leave a Reply